Motion sensor bulb - connection and settings. We can switch on or off bulb automatically whever there is a motion happens.We will get this from markets and online store. We are going to test this motion sensor light switch then connecting it and reviewing the motion sensor.
The motion sensor light switch comes with 3 parts
* Motion sensor
* An outer cover
* Connecting wire
We need to insert the connecting wires into the motion sensor first.
There are four wires in total
* 2 blue wires
* 1 yellow wire
* 1 brown wire
Insert the plastic mount cover to motion sensor first.
Blue wire is common to input and output.
How to connect wires
There are two wires for input and two wires for output.
Small two wires are output which goes to the bulb holder (yellow wire & blue wire)
shown below :
Long two wires goes to AC input line(blue wire & brown wire). Using a two pin top we will connect these wires. Shown below :
While switching on the motion sensor light activate its output and turn on for a while.After a few seconds it will turn off automatically. Now the motion sensor light switch is ready to sense motion.circuityep.com.As soon as it senses a motion,the sensor will turn on the bulb.
We can connect upto 40 watts power LED bulb here. The motion sensing range of this device is around 4~6 meters in distance.
This is how you can use this motion sensor light switch device in your house, kitchen, bedroom, ceiling, wall etc.This is a PIR motion sensor technology used widely now a days. This device helps user to automatically switch off electrical device/ bulbs when they forgot to switch off.